• Standard depths:   60 cm, 90 cm, 120 cm
• Panel thicknesses:   40 mm, 60 mm, 80 mm and 100 mm. Design 124, 645, 647 and 715 also in 30 mm
• Maximum joint-less length: 550 cm

• Standard depths: 60 cm, 90 cm, 120 cm
• Panel thickness: 40 mm, 60 mm, 80 mm and 100 mm; Design 275, 279, 280, 281, 282, 285, 394, 601, 713 and 755 also in 30 mm
• Maximum joint-less length: 550 cm

When you think of a diamond, brilliance and hardness come to mind. These qualities characterise the diamond collection. The high-gloss laminate kitchen worktops surface is extremely resistant to wear and keeps its shine after years of use.

• Standard depths:   60 cm, 90 cm, 120 cm
• Panel thicknesses:  40 mm, 60 mm, 80 mm and 100 mm; Design 458, 462, 464, 465 and 469 also 30 mm
• Maximum joint-less length: 360 cm

C+S stands for Colour + Structure which means embossed laminate kitchen worktops. Embossing the laminate is a refining technique to gain interesting optical effects – therefore C+S by Lechner kitchen worktops is similar to variegated or brushed stone surfaces. The collection includes 8 different single-colour designs, though the main focus is on grey and earth tints.

• Standard depths:   60 cm, 75 cm, 90 cm, 120 cm
• Panel thicknesses:  30mm, 40mm, 60mm, 80mm and 100 mm
• Maximum joint-less length: 301 cm

Do not use cleaning agents that contain strong acids or consist of strong saline solutions. The use of organic solvents, cold water or used cloths and wash leathers may leave marks and smears on the surface. To remove these, wipe the surface with warm water and dry with paper wipes. Any humidity (standing water, wet sponge) around butt joints should be removed immediately. Hot saucepans, frying pans or metal trays can damage the work surface. You should always use a table mat. Cutting on a laminate surface causes scratches. Therefore, the use of a cutting board is recommended on Lechner kitchen worktops.